|
Browse categories
|
 |
|
|
|
|
 |
|
|
 Customer Reviews
Slightly dull, 17 Oct 2008
Not quite the gripping read that the reviews had me believing it would be. I was expecting some tantalising narrative, imaginative characterisation and a poignant denouement - instead I got a load of electrical charts. Is this postmodernism gone mad?
slow, 14 Aug 2008
how long does it take to get it published? done my 17th and my 2391 without this and the guidence note 3, would have been helpfull to have had them in time to use them but never mind its not like they arnt going to sell is it ? Bloo*y anoid
usless review, 03 Aug 2008
The main 17th Edition book was out in Febuary.
if you are that worried, either bring it with you, or get the Amicus red book, it is more or less the on-site guide
Not yet been published, 13 Jun 2008
Been waiting since 6 april for mine to be sent ? 17 ed regs due to be complied with in july do not think its due to be published untill september 2008
|
|
|
 |
|
|
|
Customer Reviews
Slightly dull, 17 Oct 2008
Not quite the gripping read that the reviews had me believing it would be. I was expecting some tantalising narrative, imaginative characterisation and a poignant denouement - instead I got a load of electrical charts. Is this postmodernism gone mad?
slow, 14 Aug 2008
how long does it take to get it published? done my 17th and my 2391 without this and the guidence note 3, would have been helpfull to have had them in time to use them but never mind its not like they arnt going to sell is it ? Bloo*y anoid
usless review, 03 Aug 2008
The main 17th Edition book was out in Febuary.
if you are that worried, either bring it with you, or get the Amicus red book, it is more or less the on-site guide
Not yet been published, 13 Jun 2008
Been waiting since 6 april for mine to be sent ? 17 ed regs due to be complied with in july do not think its due to be published untill september 2008
You know you want it, 21 Jul 2008
I am about to order this. After reading the reviews I can't wait to get my hands on this and read it cover to cover to get all 17th,ed and ready for my next NICEIC inspection. It will be great, more regs, more questions, more trying to explain to customers. I may opt (have to) to go on a course aswell which is excellent as I was wondering where to go on holiday this year. Roll on the ammendments. There may even be a prequel and some retro bonding moments to come.
17th Edition, Great if you like poor workmanship and RCDs everywhere to cover poor workmanship!!, 12 Jul 2008
Well, after years of is the 16th overkill or under, we all had our issues with the 16th as practical installers. but my god the 17th. have done the guilds, the tutor hated it, every electrician I know and have met hate the book. New numbering to allign with the EU, wow great friggin idea that was. Oh by the way havn't the IET just issued an ammendment showing how stupid they were and highlighting how many mistakes are in this version. I would wait until they industry sees sense and makes the first published ammendemnt. £65 for a book with mistakes, bloody cheek!
beside this version is great if you a piss poor electrician and like using RCDs everywhere. what ever happend to correctly selecting, installing, inspecting and testing a circuit with good workmanship and materials so that persons, property and livestock etc are protected without the need for these 1666 ohms cheat devices which can and do seize up anyway if not maintained! (pushing the button after two years doesn't make a device relaibel, its under fault that counts!) Might as well use bloody nails. TWO WORDS COWBOYS CHARTER!!
Book for the boys, 15 May 2008
A book that is simply not written to be understood. A book that can only really be read if purchased with other guides. A book written by persons that have no idea about this industry. A black cable can now be live, existing blue cables now may be live but new blue ones will be neutrals. Persons will die because of these Regs. Written by so called experts that do not care how much it all costs. Let's put RCDs or RCBOs on everything. Why buy it, because you have to.
"Bob the fish!"........., 26 Apr 2008
........What a guy! Try reading the description of the book before buying!
....My missus loves it now i'm "Mr Competant"!
Its just like the last edition, but red &......safety is beefed up.
It'd probably sell better as an audio C.D version, as a SLEEPING aid!
Maybe that'd get the price down to a reasonable cost.
Lets hope its a while before the next one, eh?
Whoa! Steady on Betty!, 03 Apr 2008
Shortly after I received my copy, my TROUSERS EXPLODED!
Its that good!
Its Electric!!!!!
|
|
|
 |
|
|
 |
|
|
|
Customer Reviews
Slightly dull, 17 Oct 2008
Not quite the gripping read that the reviews had me believing it would be. I was expecting some tantalising narrative, imaginative characterisation and a poignant denouement - instead I got a load of electrical charts. Is this postmodernism gone mad?
slow, 14 Aug 2008
how long does it take to get it published? done my 17th and my 2391 without this and the guidence note 3, would have been helpfull to have had them in time to use them but never mind its not like they arnt going to sell is it ? Bloo*y anoid
usless review, 03 Aug 2008
The main 17th Edition book was out in Febuary.
if you are that worried, either bring it with you, or get the Amicus red book, it is more or less the on-site guide
Not yet been published, 13 Jun 2008
Been waiting since 6 april for mine to be sent ? 17 ed regs due to be complied with in july do not think its due to be published untill september 2008
You know you want it, 21 Jul 2008
I am about to order this. After reading the reviews I can't wait to get my hands on this and read it cover to cover to get all 17th,ed and ready for my next NICEIC inspection. It will be great, more regs, more questions, more trying to explain to customers. I may opt (have to) to go on a course aswell which is excellent as I was wondering where to go on holiday this year. Roll on the ammendments. There may even be a prequel and some retro bonding moments to come.
17th Edition, Great if you like poor workmanship and RCDs everywhere to cover poor workmanship!!, 12 Jul 2008
Well, after years of is the 16th overkill or under, we all had our issues with the 16th as practical installers. but my god the 17th. have done the guilds, the tutor hated it, every electrician I know and have met hate the book. New numbering to allign with the EU, wow great friggin idea that was. Oh by the way havn't the IET just issued an ammendment showing how stupid they were and highlighting how many mistakes are in this version. I would wait until they industry sees sense and makes the first published ammendemnt. £65 for a book with mistakes, bloody cheek!
beside this version is great if you a piss poor electrician and like using RCDs everywhere. what ever happend to correctly selecting, installing, inspecting and testing a circuit with good workmanship and materials so that persons, property and livestock etc are protected without the need for these 1666 ohms cheat devices which can and do seize up anyway if not maintained! (pushing the button after two years doesn't make a device relaibel, its under fault that counts!) Might as well use bloody nails. TWO WORDS COWBOYS CHARTER!!
Book for the boys, 15 May 2008
A book that is simply not written to be understood. A book that can only really be read if purchased with other guides. A book written by persons that have no idea about this industry. A black cable can now be live, existing blue cables now may be live but new blue ones will be neutrals. Persons will die because of these Regs. Written by so called experts that do not care how much it all costs. Let's put RCDs or RCBOs on everything. Why buy it, because you have to.
"Bob the fish!"........., 26 Apr 2008
........What a guy! Try reading the description of the book before buying!
....My missus loves it now i'm "Mr Competant"!
Its just like the last edition, but red &......safety is beefed up.
It'd probably sell better as an audio C.D version, as a SLEEPING aid!
Maybe that'd get the price down to a reasonable cost.
Lets hope its a while before the next one, eh?
Whoa! Steady on Betty!, 03 Apr 2008
Shortly after I received my copy, my TROUSERS EXPLODED!
Its that good!
Its Electric!!!!!
An excellent book, 24 Jun 2008
The clear pictures and easy to follow step by step guides were extremely helpful when it came to taking my C&G 2330 Level 3 practical exams. The section on completion of test certificates was particularly good, putting everything into plain language.
I would recommend this book to any trainee electrician.
Best yet, 18 May 2008
This is the ultimate guide book if you are studying for your 2391.I have failed this exam once but with this down to earth approach on inspection and testing I feel very confident of a pass.Very easy to understand well explained.Definately aimed at 2391 City and Guilds exam success best book I have come across like a condensed down 7671 and guidance note 3 in easy to remember terms.
An Excellent Book, 10 Apr 2008
This book is an excellent guide to inspection and testing. It keeps the theory down to what you need to know to get the job done, without a load of waffle.
The book is full of pictures which are clear and in full colour, showing real electrical installations and how and where to connect test leads. There are also images of testers( Kewtech and Megger) and how to set them up correctly. The author uses a step by step approach and coupled with the photographs you cannot go far wrong.
There are lots of examples of certificates and how to fill them in for example installations. Details of what the values mean and how to calculate/ measure them are also included.
If you are looking for an inspection and testing book I can honestly say buy this one, it is excellent.
A must for anyone in the Electrical Installation field, 01 Feb 2008
I was fortunate enough to have been taught by Chris Kitcher at Crawley College for a couple of years before I moved to N.Ireland.
I remember at Crawley barraging him with questions, scenarios etc which he always answered and with references to the regs.
A lot of the questions now appear with answers in the book (although I could still come up with a load more now !!)
I heard this book was due out several months back from students being taught by Chris and knew it was going to be the right book for all electricians out there getting their hands dirty!. I'm definately not disappointed at all. The book is excellent. Look forward to more technical books from Chris if he can get away from Southampton!!
Breath of fresh air, 14 Dec 2007
I found the book to be a breath of fresh air from all those other tecnically loaded , anorak wearing , train spotting text books .
The author certainly has a well grounded knowledge of the practical applications of testing and inspecting.
|
|
|
 |
|
|
|
Customer Reviews
Slightly dull, 17 Oct 2008
Not quite the gripping read that the reviews had me believing it would be. I was expecting some tantalising narrative, imaginative characterisation and a poignant denouement - instead I got a load of electrical charts. Is this postmodernism gone mad?
slow, 14 Aug 2008
how long does it take to get it published? done my 17th and my 2391 without this and the guidence note 3, would have been helpfull to have had them in time to use them but never mind its not like they arnt going to sell is it ? Bloo*y anoid
usless review, 03 Aug 2008
The main 17th Edition book was out in Febuary.
if you are that worried, either bring it with you, or get the Amicus red book, it is more or less the on-site guide
Not yet been published, 13 Jun 2008
Been waiting since 6 april for mine to be sent ? 17 ed regs due to be complied with in july do not think its due to be published untill september 2008
You know you want it, 21 Jul 2008
I am about to order this. After reading the reviews I can't wait to get my hands on this and read it cover to cover to get all 17th,ed and ready for my next NICEIC inspection. It will be great, more regs, more questions, more trying to explain to customers. I may opt (have to) to go on a course aswell which is excellent as I was wondering where to go on holiday this year. Roll on the ammendments. There may even be a prequel and some retro bonding moments to come.
17th Edition, Great if you like poor workmanship and RCDs everywhere to cover poor workmanship!!, 12 Jul 2008
Well, after years of is the 16th overkill or under, we all had our issues with the 16th as practical installers. but my god the 17th. have done the guilds, the tutor hated it, every electrician I know and have met hate the book. New numbering to allign with the EU, wow great friggin idea that was. Oh by the way havn't the IET just issued an ammendment showing how stupid they were and highlighting how many mistakes are in this version. I would wait until they industry sees sense and makes the first published ammendemnt. £65 for a book with mistakes, bloody cheek!
beside this version is great if you a piss poor electrician and like using RCDs everywhere. what ever happend to correctly selecting, installing, inspecting and testing a circuit with good workmanship and materials so that persons, property and livestock etc are protected without the need for these 1666 ohms cheat devices which can and do seize up anyway if not maintained! (pushing the button after two years doesn't make a device relaibel, its under fault that counts!) Might as well use bloody nails. TWO WORDS COWBOYS CHARTER!!
Book for the boys, 15 May 2008
A book that is simply not written to be understood. A book that can only really be read if purchased with other guides. A book written by persons that have no idea about this industry. A black cable can now be live, existing blue cables now may be live but new blue ones will be neutrals. Persons will die because of these Regs. Written by so called experts that do not care how much it all costs. Let's put RCDs or RCBOs on everything. Why buy it, because you have to.
"Bob the fish!"........., 26 Apr 2008
........What a guy! Try reading the description of the book before buying!
....My missus loves it now i'm "Mr Competant"!
Its just like the last edition, but red &......safety is beefed up.
It'd probably sell better as an audio C.D version, as a SLEEPING aid!
Maybe that'd get the price down to a reasonable cost.
Lets hope its a while before the next one, eh?
Whoa! Steady on Betty!, 03 Apr 2008
Shortly after I received my copy, my TROUSERS EXPLODED!
Its that good!
Its Electric!!!!!
An excellent book, 24 Jun 2008
The clear pictures and easy to follow step by step guides were extremely helpful when it came to taking my C&G 2330 Level 3 practical exams. The section on completion of test certificates was particularly good, putting everything into plain language.
I would recommend this book to any trainee electrician.
Best yet, 18 May 2008
This is the ultimate guide book if you are studying for your 2391.I have failed this exam once but with this down to earth approach on inspection and testing I feel very confident of a pass.Very easy to understand well explained.Definately aimed at 2391 City and Guilds exam success best book I have come across like a condensed down 7671 and guidance note 3 in easy to remember terms.
An Excellent Book, 10 Apr 2008
This book is an excellent guide to inspection and testing. It keeps the theory down to what you need to know to get the job done, without a load of waffle.
The book is full of pictures which are clear and in full colour, showing real electrical installations and how and where to connect test leads. There are also images of testers( Kewtech and Megger) and how to set them up correctly. The author uses a step by step approach and coupled with the photographs you cannot go far wrong.
There are lots of examples of certificates and how to fill them in for example installations. Details of what the values mean and how to calculate/ measure them are also included.
If you are looking for an inspection and testing book I can honestly say buy this one, it is excellent.
A must for anyone in the Electrical Installation field, 01 Feb 2008
I was fortunate enough to have been taught by Chris Kitcher at Crawley College for a couple of years before I moved to N.Ireland.
I remember at Crawley barraging him with questions, scenarios etc which he always answered and with references to the regs.
A lot of the questions now appear with answers in the book (although I could still come up with a load more now !!)
I heard this book was due out several months back from students being taught by Chris and knew it was going to be the right book for all electricians out there getting their hands dirty!. I'm definately not disappointed at all. The book is excellent. Look forward to more technical books from Chris if he can get away from Southampton!!
Breath of fresh air, 14 Dec 2007
I found the book to be a breath of fresh air from all those other tecnically loaded , anorak wearing , train spotting text books .
The author certainly has a well grounded knowledge of the practical applications of testing and inspecting.
Too many errors, 19 Oct 2008
Whilst generally a reasonable book, there are a considerable number of errors. These include referencing incorrect tables and regulation numbers, and a number of simple typographical errors, e.g. stating that the minimum diameter for the main protective bonding conductor should be 60mm sq, rather than 6. Whilst the more experienced will instantly spot these errors, they could lead to confusion to the novice, who, after all, the book is aimed at. One particular area of concern is in the Inspection and Testing section where, in the process of determining R1+R2, the reader is advised to temporarily link together the line conductor and the CPC. At no point is any emphasis placed on the fact the circuit must be isolated from the supply before this procedure is attempted!
17th edition without the headache, 18 Aug 2008
This book will prove invaluable to novice and experienced electricians. It is very well set out and easy to read.
|
|
|
 |
|
|
 |
|
|
|
Customer Reviews
Slightly dull, 17 Oct 2008
Not quite the gripping read that the reviews had me believing it would be. I was expecting some tantalising narrative, imaginative characterisation and a poignant denouement - instead I got a load of electrical charts. Is this postmodernism gone mad?
slow, 14 Aug 2008
how long does it take to get it published? done my 17th and my 2391 without this and the guidence note 3, would have been helpfull to have had them in time to use them but never mind its not like they arnt going to sell is it ? Bloo*y anoid
usless review, 03 Aug 2008
The main 17th Edition book was out in Febuary.
if you are that worried, either bring it with you, or get the Amicus red book, it is more or less the on-site guide
Not yet been published, 13 Jun 2008
Been waiting since 6 april for mine to be sent ? 17 ed regs due to be complied with in july do not think its due to be published untill september 2008
You know you want it, 21 Jul 2008
I am about to order this. After reading the reviews I can't wait to get my hands on this and read it cover to cover to get all 17th,ed and ready for my next NICEIC inspection. It will be great, more regs, more questions, more trying to explain to customers. I may opt (have to) to go on a course aswell which is excellent as I was wondering where to go on holiday this year. Roll on the ammendments. There may even be a prequel and some retro bonding moments to come.
17th Edition, Great if you like poor workmanship and RCDs everywhere to cover poor workmanship!!, 12 Jul 2008
Well, after years of is the 16th overkill or under, we all had our issues with the 16th as practical installers. but my god the 17th. have done the guilds, the tutor hated it, every electrician I know and have met hate the book. New numbering to allign with the EU, wow great friggin idea that was. Oh by the way havn't the IET just issued an ammendment showing how stupid they were and highlighting how many mistakes are in this version. I would wait until they industry sees sense and makes the first published ammendemnt. £65 for a book with mistakes, bloody cheek!
beside this version is great if you a piss poor electrician and like using RCDs everywhere. what ever happend to correctly selecting, installing, inspecting and testing a circuit with good workmanship and materials so that persons, property and livestock etc are protected without the need for these 1666 ohms cheat devices which can and do seize up anyway if not maintained! (pushing the button after two years doesn't make a device relaibel, its under fault that counts!) Might as well use bloody nails. TWO WORDS COWBOYS CHARTER!!
Book for the boys, 15 May 2008
A book that is simply not written to be understood. A book that can only really be read if purchased with other guides. A book written by persons that have no idea about this industry. A black cable can now be live, existing blue cables now may be live but new blue ones will be neutrals. Persons will die because of these Regs. Written by so called experts that do not care how much it all costs. Let's put RCDs or RCBOs on everything. Why buy it, because you have to.
"Bob the fish!"........., 26 Apr 2008
........What a guy! Try reading the description of the book before buying!
....My missus loves it now i'm "Mr Competant"!
Its just like the last edition, but red &......safety is beefed up.
It'd probably sell better as an audio C.D version, as a SLEEPING aid!
Maybe that'd get the price down to a reasonable cost.
Lets hope its a while before the next one, eh?
Whoa! Steady on Betty!, 03 Apr 2008
Shortly after I received my copy, my TROUSERS EXPLODED!
Its that good!
Its Electric!!!!!
An excellent book, 24 Jun 2008
The clear pictures and easy to follow step by step guides were extremely helpful when it came to taking my C&G 2330 Level 3 practical exams. The section on completion of test certificates was particularly good, putting everything into plain language.
I would recommend this book to any trainee electrician.
Best yet, 18 May 2008
This is the ultimate guide book if you are studying for your 2391.I have failed this exam once but with this down to earth approach on inspection and testing I feel very confident of a pass.Very easy to understand well explained.Definately aimed at 2391 City and Guilds exam success best book I have come across like a condensed down 7671 and guidance note 3 in easy to remember terms.
An Excellent Book, 10 Apr 2008
This book is an excellent guide to inspection and testing. It keeps the theory down to what you need to know to get the job done, without a load of waffle.
The book is full of pictures which are clear and in full colour, showing real electrical installations and how and where to connect test leads. There are also images of testers( Kewtech and Megger) and how to set them up correctly. The author uses a step by step approach and coupled with the photographs you cannot go far wrong.
There are lots of examples of certificates and how to fill them in for example installations. Details of what the values mean and how to calculate/ measure them are also included.
If you are looking for an inspection and testing book I can honestly say buy this one, it is excellent.
A must for anyone in the Electrical Installation field, 01 Feb 2008
I was fortunate enough to have been taught by Chris Kitcher at Crawley College for a couple of years before I moved to N.Ireland.
I remember at Crawley barraging him with questions, scenarios etc which he always answered and with references to the regs.
A lot of the questions now appear with answers in the book (although I could still come up with a load more now !!)
I heard this book was due out several months back from students being taught by Chris and knew it was going to be the right book for all electricians out there getting their hands dirty!. I'm definately not disappointed at all. The book is excellent. Look forward to more technical books from Chris if he can get away from Southampton!!
Breath of fresh air, 14 Dec 2007
I found the book to be a breath of fresh air from all those other tecnically loaded , anorak wearing , train spotting text books .
The author certainly has a well grounded knowledge of the practical applications of testing and inspecting.
Too many errors, 19 Oct 2008
Whilst generally a reasonable book, there are a considerable number of errors. These include referencing incorrect tables and regulation numbers, and a number of simple typographical errors, e.g. stating that the minimum diameter for the main protective bonding conductor should be 60mm sq, rather than 6. Whilst the more experienced will instantly spot these errors, they could lead to confusion to the novice, who, after all, the book is aimed at. One particular area of concern is in the Inspection and Testing section where, in the process of determining R1+R2, the reader is advised to temporarily link together the line conductor and the CPC. At no point is any emphasis placed on the fact the circuit must be isolated from the supply before this procedure is attempted!
17th edition without the headache, 18 Aug 2008
This book will prove invaluable to novice and experienced electricians. It is very well set out and easy to read.
Essential if you plan to pass the C&G Exam, 05 Jul 2006
This book will never win a prize for literary content, but if you're going to get serious about Portable Appliance Testing it's this season's must have and it will get you through the C&G exam. Somewhat expensive (hence 4*s) - to be expected maybe? - electrical engineers are probably not best known for their writing skills so there must be a rarity premium. Tells you what you need to know and lots of stuff you don't - hardcore information and good for insomnia too. The Amazon combo deal including this title and "PAT - Portable Appliance Testing: In-service Inspection and Testing of Electrical Equipment" by Brian Scaddan is excellent and gives you the only two documents you really need. Well worth the money.
|
|
|
 |
|
|
|
Customer Reviews
Slightly dull, 17 Oct 2008
Not quite the gripping read that the reviews had me believing it would be. I was expecting some tantalising narrative, imaginative characterisation and a poignant denouement - instead I got a load of electrical charts. Is this postmodernism gone mad?
slow, 14 Aug 2008
how long does it take to get it published? done my 17th and my 2391 without this and the guidence note 3, would have been helpfull to have had them in time to use them but never mind its not like they arnt going to sell is it ? Bloo*y anoid
usless review, 03 Aug 2008
The main 17th Edition book was out in Febuary.
if you are that worried, either bring it with you, or get the Amicus red book, it is more or less the on-site guide
Not yet been published, 13 Jun 2008
Been waiting since 6 april for mine to be sent ? 17 ed regs due to be complied with in july do not think its due to be published untill september 2008
You know you want it, 21 Jul 2008
I am about to order this. After reading the reviews I can't wait to get my hands on this and read it cover to cover to get all 17th,ed and ready for my next NICEIC inspection. It will be great, more regs, more questions, more trying to explain to customers. I may opt (have to) to go on a course aswell which is excellent as I was wondering where to go on holiday this year. Roll on the ammendments. There may even be a prequel and some retro bonding moments to come.
17th Edition, Great if you like poor workmanship and RCDs everywhere to cover poor workmanship!!, 12 Jul 2008
Well, after years of is the 16th overkill or under, we all had our issues with the 16th as practical installers. but my god the 17th. have done the guilds, the tutor hated it, every electrician I know and have met hate the book. New numbering to allign with the EU, wow great friggin idea that was. Oh by the way havn't the IET just issued an ammendment showing how stupid they were and highlighting how many mistakes are in this version. I would wait until they industry sees sense and makes the first published ammendemnt. £65 for a book with mistakes, bloody cheek!
beside this version is great if you a piss poor electrician and like using RCDs everywhere. what ever happend to correctly selecting, installing, inspecting and testing a circuit with good workmanship and materials so that persons, property and livestock etc are protected without the need for these 1666 ohms cheat devices which can and do seize up anyway if not maintained! (pushing the button after two years doesn't make a device relaibel, its under fault that counts!) Might as well use bloody nails. TWO WORDS COWBOYS CHARTER!!
Book for the boys, 15 May 2008
A book that is simply not written to be understood. A book that can only really be read if purchased with other guides. A book written by persons that have no idea about this industry. A black cable can now be live, existing blue cables now may be live but new blue ones will be neutrals. Persons will die because of these Regs. Written by so called experts that do not care how much it all costs. Let's put RCDs or RCBOs on everything. Why buy it, because you have to.
"Bob the fish!"........., 26 Apr 2008
........What a guy! Try reading the description of the book before buying!
....My missus loves it now i'm "Mr Competant"!
Its just like the last edition, but red &......safety is beefed up.
It'd probably sell better as an audio C.D version, as a SLEEPING aid!
Maybe that'd get the price down to a reasonable cost.
Lets hope its a while before the next one, eh?
Whoa! Steady on Betty!, 03 Apr 2008
Shortly after I received my copy, my TROUSERS EXPLODED!
Its that good!
Its Electric!!!!!
An excellent book, 24 Jun 2008
The clear pictures and easy to follow step by step guides were extremely helpful when it came to taking my C&G 2330 Level 3 practical exams. The section on completion of test certificates was particularly good, putting everything into plain language.
I would recommend this book to any trainee electrician.
Best yet, 18 May 2008
This is the ultimate guide book if you are studying for your 2391.I have failed this exam once but with this down to earth approach on inspection and testing I feel very confident of a pass.Very easy to understand well explained.Definately aimed at 2391 City and Guilds exam success best book I have come across like a condensed down 7671 and guidance note 3 in easy to remember terms.
An Excellent Book, 10 Apr 2008
This book is an excellent guide to inspection and testing. It keeps the theory down to what you need to know to get the job done, without a load of waffle.
The book is full of pictures which are clear and in full colour, showing real electrical installations and how and where to connect test leads. There are also images of testers( Kewtech and Megger) and how to set them up correctly. The author uses a step by step approach and coupled with the photographs you cannot go far wrong.
There are lots of examples of certificates and how to fill them in for example installations. Details of what the values mean and how to calculate/ measure them are also included.
If you are looking for an inspection and testing book I can honestly say buy this one, it is excellent.
A must for anyone in the Electrical Installation field, 01 Feb 2008
I was fortunate enough to have been taught by Chris Kitcher at Crawley College for a couple of years before I moved to N.Ireland.
I remember at Crawley barraging him with questions, scenarios etc which he always answered and with references to the regs.
A lot of the questions now appear with answers in the book (although I could still come up with a load more now !!)
I heard this book was due out several months back from students being taught by Chris and knew it was going to be the right book for all electricians out there getting their hands dirty!. I'm definately not disappointed at all. The book is excellent. Look forward to more technical books from Chris if he can get away from Southampton!!
Breath of fresh air, 14 Dec 2007
I found the book to be a breath of fresh air from all those other tecnically loaded , anorak wearing , train spotting text books .
The author certainly has a well grounded knowledge of the practical applications of testing and inspecting.
Too many errors, 19 Oct 2008
Whilst generally a reasonable book, there are a considerable number of errors. These include referencing incorrect tables and regulation numbers, and a number of simple typographical errors, e.g. stating that the minimum diameter for the main protective bonding conductor should be 60mm sq, rather than 6. Whilst the more experienced will instantly spot these errors, they could lead to confusion to the novice, who, after all, the book is aimed at. One particular area of concern is in the Inspection and Testing section where, in the process of determining R1+R2, the reader is advised to temporarily link together the line conductor and the CPC. At no point is any emphasis placed on the fact the circuit must be isolated from the supply before this procedure is attempted!
17th edition without the headache, 18 Aug 2008
This book will prove invaluable to novice and experienced electricians. It is very well set out and easy to read.
Essential if you plan to pass the C&G Exam, 05 Jul 2006
This book will never win a prize for literary content, but if you're going to get serious about Portable Appliance Testing it's this season's must have and it will get you through the C&G exam. Somewhat expensive (hence 4*s) - to be expected maybe? - electrical engineers are probably not best known for their writing skills so there must be a rarity premium. Tells you what you need to know and lots of stuff you don't - hardcore information and good for insomnia too. The Amazon combo deal including this title and "PAT - Portable Appliance Testing: In-service Inspection and Testing of Electrical Equipment" by Brian Scaddan is excellent and gives you the only two documents you really need. Well worth the money.
Great book, 27 Jun 2008
Very difficult exam . This gives a great view of Question that could be asked with good answers, Great Help.Lots of advanced study needed before course and exam. This book shows what level is requied. Good Book.
|
|
|
 |
|
|
 |
|
|
|
Customer Reviews
Slightly dull, 17 Oct 2008
Not quite the gripping read that the reviews had me believing it would be. I was expecting some tantalising narrative, imaginative characterisation and a poignant denouement - instead I got a load of electrical charts. Is this postmodernism gone mad?
slow, 14 Aug 2008
how long does it take to get it published? done my 17th and my 2391 without this and the guidence note 3, would have been helpfull to have had them in time to use them but never mind its not like they arnt going to sell is it ? Bloo*y anoid
usless review, 03 Aug 2008
The main 17th Edition book was out in Febuary.
if you are that worried, either bring it with you, or get the Amicus red book, it is more or less the on-site guide
Not yet been published, 13 Jun 2008
Been waiting since 6 april for mine to be sent ? 17 ed regs due to be complied with in july do not think its due to be published untill september 2008
You know you want it, 21 Jul 2008
I am about to order this. After reading the reviews I can't wait to get my hands on this and read it cover to cover to get all 17th,ed and ready for my next NICEIC inspection. It will be great, more regs, more questions, more trying to explain to customers. I may opt (have to) to go on a course aswell which is excellent as I was wondering where to go on holiday this year. Roll on the ammendments. There may even be a prequel and some retro bonding moments to come.
17th Edition, Great if you like poor workmanship and RCDs everywhere to cover poor workmanship!!, 12 Jul 2008
Well, after years of is the 16th overkill or under, we all had our issues with the 16th as practical installers. but my god the 17th. have done the guilds, the tutor hated it, every electrician I know and have met hate the book. New numbering to allign with the EU, wow great friggin idea that was. Oh by the way havn't the IET just issued an ammendment showing how stupid they were and highlighting how many mistakes are in this version. I would wait until they industry sees sense and makes the first published ammendemnt. £65 for a book with mistakes, bloody cheek!
beside this version is great if you a piss poor electrician and like using RCDs everywhere. what ever happend to correctly selecting, installing, inspecting and testing a circuit with good workmanship and materials so that persons, property and livestock etc are protected without the need for these 1666 ohms cheat devices which can and do seize up anyway if not maintained! (pushing the button after two years doesn't make a device relaibel, its under fault that counts!) Might as well use bloody nails. TWO WORDS COWBOYS CHARTER!!
Book for the boys, 15 May 2008
A book that is simply not written to be understood. A book that can only really be read if purchased with other guides. A book written by persons that have no idea about this industry. A black cable can now be live, existing blue cables now may be live but new blue ones will be neutrals. Persons will die because of these Regs. Written by so called experts that do not care how much it all costs. Let's put RCDs or RCBOs on everything. Why buy it, because you have to.
"Bob the fish!"........., 26 Apr 2008
........What a guy! Try reading the description of the book before buying!
....My missus loves it now i'm "Mr Competant"!
Its just like the last edition, but red &......safety is beefed up.
It'd probably sell better as an audio C.D version, as a SLEEPING aid!
Maybe that'd get the price down to a reasonable cost.
Lets hope its a while before the next one, eh?
Whoa! Steady on Betty!, 03 Apr 2008
Shortly after I received my copy, my TROUSERS EXPLODED!
Its that good!
Its Electric!!!!!
An excellent book, 24 Jun 2008
The clear pictures and easy to follow step by step guides were extremely helpful when it came to taking my C&G 2330 Level 3 practical exams. The section on completion of test certificates was particularly good, putting everything into plain language.
I would recommend this book to any trainee electrician.
Best yet, 18 May 2008
This is the ultimate guide book if you are studying for your 2391.I have failed this exam once but with this down to earth approach on inspection and testing I feel very confident of a pass.Very easy to understand well explained.Definately aimed at 2391 City and Guilds exam success best book I have come across like a condensed down 7671 and guidance note 3 in easy to remember terms.
An Excellent Book, 10 Apr 2008
This book is an excellent guide to inspection and testing. It keeps the theory down to what you need to know to get the job done, without a load of waffle.
The book is full of pictures which are clear and in full colour, showing real electrical installations and how and where to connect test leads. There are also images of testers( Kewtech and Megger) and how to set them up correctly. The author uses a step by step approach and coupled with the photographs you cannot go far wrong.
There are lots of examples of certificates and how to fill them in for example installations. Details of what the values mean and how to calculate/ measure them are also included.
If you are looking for an inspection and testing book I can honestly say buy this one, it is excellent.
A must for anyone in the Electrical Installation field, 01 Feb 2008
I was fortunate enough to have been taught by Chris Kitcher at Crawley College for a couple of years before I moved to N.Ireland.
I remember at Crawley barraging him with questions, scenarios etc which he always answered and with references to the regs.
A lot of the questions now appear with answers in the book (although I could still come up with a load more now !!)
I heard this book was due out several months back from students being taught by Chris and knew it was going to be the right book for all electricians out there getting their hands dirty!. I'm definately not disappointed at all. The book is excellent. Look forward to more technical books from Chris if he can get away from Southampton!!
Breath of fresh air, 14 Dec 2007
I found the book to be a breath of fresh air from all those other tecnically loaded , anorak wearing , train spotting text books .
The author certainly has a well grounded knowledge of the practical applications of testing and inspecting.
Too many errors, 19 Oct 2008
Whilst generally a reasonable book, there are a considerable number of errors. These include referencing incorrect tables and regulation numbers, and a number of simple typographical errors, e.g. stating that the minimum diameter for the main protective bonding conductor should be 60mm sq, rather than 6. Whilst the more experienced will instantly spot these errors, they could lead to confusion to the novice, who, after all, the book is aimed at. One particular area of concern is in the Inspection and Testing section where, in the process of determining R1+R2, the reader is advised to temporarily link together the line conductor and the CPC. At no point is any emphasis placed on the fact the circuit must be isolated from the supply before this procedure is attempted!
17th edition without the headache, 18 Aug 2008
This book will prove invaluable to novice and experienced electricians. It is very well set out and easy to read.
Essential if you plan to pass the C&G Exam, 05 Jul 2006
This book will never win a prize for literary content, but if you're going to get serious about Portable Appliance Testing it's this season's must have and it will get you through the C&G exam. Somewhat expensive (hence 4*s) - to be expected maybe? - electrical engineers are probably not best known for their writing skills so there must be a rarity premium. Tells you what you need to know and lots of stuff you don't - hardcore information and good for insomnia too. The Amazon combo deal including this title and "PAT - Portable Appliance Testing: In-service Inspection and Testing of Electrical Equipment" by Brian Scaddan is excellent and gives you the only two documents you really need. Well worth the money.
Great book, 27 Jun 2008
Very difficult exam . This gives a great view of Question that could be asked with good answers, Great Help.Lots of advanced study needed before course and exam. This book shows what level is requied. Good Book.
Best ever, 28 Apr 2008
If you are like me and started in the trade with the 13th Edition IEE Regs
You will rate this Guide.
Ihave used John Whitfield's Guides for 20 years, its the only one for me.
I always keep one in the tool box and one in the office, As it say's on the back cover I don't leave home without it.
|
|
|
 |
|
|
Customer Reviews
Slightly dull, 17 Oct 2008
Not quite the gripping read that the reviews had me believing it would be. I was expecting some tantalising narrative, imaginative characterisation and a poignant denouement - instead I got a load of electrical charts. Is this postmodernism gone mad? slow, 14 Aug 2008
how long does it take to get it published? done my 17th and my 2391 without this and the guidence note 3, would have been helpfull to have had them in time to use them but never mind its not like they arnt going to sell is it ? Bloo*y anoid usless review, 03 Aug 2008
The main 17th Edition book was out in Febuary.
if you are that worried, either bring it with you, or get the Amicus red book, it is more or less the on-site guide Not yet been published, 13 Jun 2008
Been waiting since 6 april for mine to be sent ? 17 ed regs due to be complied with in july do not think its due to be published untill september 2008 You know you want it, 21 Jul 2008
I am about to order this. After reading the reviews I can't wait to get my hands on this and read it cover to cover to get all 17th,ed and ready for my next NICEIC inspection. It will be great, more regs, more questions, more trying to explain to customers. I may opt (have to) to go on a course aswell which is excellent as I was wondering where to go on holiday this year. Roll on the ammendments. There may even be a prequel and some retro bonding moments to come. 17th Edition, Great if you like poor workmanship and RCDs everywhere to cover poor workmanship!!, 12 Jul 2008
Well, after years of is the 16th overkill or under, we all had our issues with the 16th as practical installers. but my god the 17th. have done the guilds, the tutor hated it, every electrician I know and have met hate the book. New numbering to allign with the EU, wow great friggin idea that was. Oh by the way havn't the IET just issued an ammendment showing how stupid they were and highlighting how many mistakes are in this version. I would wait until they industry sees sense and makes the first published ammendemnt. £65 for a book with mistakes, bloody cheek!
beside this version is great if you a piss poor electrician and like using RCDs everywhere. what ever happend to correctly selecting, installing, inspecting and testing a circuit with good workmanship and materials so that persons, property and livestock etc are protected without the need for these 1666 ohms cheat devices which can and do seize up anyway if not maintained! (pushing the button after two years doesn't make a device relaibel, its under fault that counts!) Might as well use bloody nails. TWO WORDS COWBOYS CHARTER!! Book for the boys, 15 May 2008
A book that is simply not written to be understood. A book that can only really be read if purchased with other guides. A book written by persons that have no idea about this industry. A black cable can now be live, existing blue cables now may be live but new blue ones will be neutrals. Persons will die because of these Regs. Written by so called experts that do not care how much it all costs. Let's put RCDs or RCBOs on everything. Why buy it, because you have to. "Bob the fish!"........., 26 Apr 2008
........What a guy! Try reading the description of the book before buying!
....My missus loves it now i'm "Mr Competant"!
Its just like the last edition, but red &......safety is beefed up.
It'd probably sell better as an audio C.D version, as a SLEEPING aid!
Maybe that'd get the price down to a reasonable cost.
Lets hope its a while before the next one, eh?
Whoa! Steady on Betty!, 03 Apr 2008
Shortly after I received my copy, my TROUSERS EXPLODED!
Its that good!
Its Electric!!!!! An excellent book, 24 Jun 2008
The clear pictures and easy to follow step by step guides were extremely helpful when it came to taking my C&G 2330 Level 3 practical exams. The section on completion of test certificates was particularly good, putting everything into plain language.
I would recommend this book to any trainee electrician. Best yet, 18 May 2008
This is the ultimate guide book if you are studying for your 2391.I have failed this exam once but with this down to earth approach on inspection and testing I feel very confident of a pass.Very easy to understand well explained.Definately aimed at 2391 City and Guilds exam success best book I have come across like a condensed down 7671 and guidance note 3 in easy to remember terms. An Excellent Book, 10 Apr 2008
This book is an excellent guide to inspection and testing. It keeps the theory down to what you need to know to get the job done, without a load of waffle.
The book is full of pictures which are clear and in full colour, showing real electrical installations and how and where to connect test leads. There are also images of testers( Kewtech and Megger) and how to set them up correctly. The author uses a step by step approach and coupled with the photographs you cannot go far wrong.
There are lots of examples of certificates and how to fill them in for example installations. Details of what the values mean and how to calculate/ measure them are also included.
If you are looking for an inspection and testing book I can honestly say buy this one, it is excellent. A must for anyone in the Electrical Installation field, 01 Feb 2008
I was fortunate enough to have been taught by Chris Kitcher at Crawley College for a couple of years before I moved to N.Ireland.
I remember at Crawley barraging him with questions, scenarios etc which he always answered and with references to the regs.
A lot of the questions now appear with answers in the book (although I could still come up with a load more now !!)
I heard this book was due out several months back from students being taught by Chris and knew it was going to be the right book for all electricians out there getting their hands dirty!. I'm definately not disappointed at all. The book is excellent. Look forward to more technical books from Chris if he can get away from Southampton!! Breath of fresh air, 14 Dec 2007
I found the book to be a breath of fresh air from all those other tecnically loaded , anorak wearing , train spotting text books .
The author certainly has a well grounded knowledge of the practical applications of testing and inspecting. Too many errors, 19 Oct 2008
Whilst generally a reasonable book, there are a considerable number of errors. These include referencing incorrect tables and regulation numbers, and a number of simple typographical errors, e.g. stating that the minimum diameter for the main protective bonding conductor should be 60mm sq, rather than 6. Whilst the more experienced will instantly spot these errors, they could lead to confusion to the novice, who, after all, the book is aimed at. One particular area of concern is in the Inspection and Testing section where, in the process of determining R1+R2, the reader is advised to temporarily link together the line conductor and the CPC. At no point is any emphasis placed on the fact the circuit must be isolated from the supply before this procedure is attempted! 17th edition without the headache, 18 Aug 2008
This book will prove invaluable to novice and experienced electricians. It is very well set out and easy to read. Essential if you plan to pass the C&G Exam, 05 Jul 2006
This book will never win a prize for literary content, but if you're going to get serious about Portable Appliance Testing it's this season's must have and it will get you through the C&G exam. Somewhat expensive (hence 4*s) - to be expected maybe? - electrical engineers are probably not best known for their writing skills so there must be a rarity premium. Tells you what you need to know and lots of stuff you don't - hardcore information and good for insomnia too. The Amazon combo deal including this title and "PAT - Portable Appliance Testing: In-service Inspection and Testing of Electrical Equipment" by Brian Scaddan is excellent and gives you the only two documents you really need. Well worth the money. Great book, 27 Jun 2008
Very difficult exam . This gives a great view of Question that could be asked with good answers, Great Help.Lots of advanced study needed before course and exam. This book shows what level is requied. Good Book. Best ever, 28 Apr 2008
If you are like me and started in the trade with the 13th Edition IEE Regs
You will rate this Guide.
Ihave used John Whitfield's Guides for 20 years, its the only one for me.
I always keep one in the tool box and one in the office, As it say's on the back cover I don't leave home without it.
TOP BUY*****, 20 Jan 2008
This book is very handy as i am on the C & G 2330 level 2 course,
It covers all the basic theory calculations TOP BUY*****
Another great re-write!, 13 Feb 2006
I used these books years ago to supplement my teaching of people wishing to become electricians and I am glad to see how they have been simplified to suit all potential electricians. I would recomend this book and indeed book 1 to all theory teachers and their students alike.
How can you do without it!, 13 Feb 2006
Its great to see this excellent book revisited. The new style is totally suitable for todays trainee electricians. It must be one of the best value for money books written! Well done
Electrical Installation Calculations, 04 Feb 2004
A very useful study aid, the book is ideal for those who have become a little rusty with their calculations and need to remind themselves of the basics. The exercises and answers allow you to work at a speed suited to yourself and you know that it's right.
|
|
|
 |
|
|
|
Product Description
Written by experts who are closely involved in preparing the IEE Wiring Regulations (BS 7671) Seventeenth Edition, this book is designed for candidates of the City & Guilds Level 3 Certificate in the Requirements for Electrical Installations BS 7671: 2008 (2382-10).
Exam Success IEE Wiring Regulations 2382-10:
* Reinforces learning and understanding of course content.
* Gives learners focused exam practice.
* Answers candidates most frequently asked questions.
* Offers practical advice and expert tips on sitting the exam.
* Follows the exam structure.
* Covers all parts of the exam content.
* Prepares learners for the online GOLA examination.
|
|
|
 |
|
|
 |
|
|
|
Product Description
The Toolbox Guide is the ideal practical guide for electricians on the requirements of the new 17th Edition (BS 7671: 2008). This easy to use guide is an ideal accompaniment to the IEE Wiring Regulations and includes colour diagrams of typical installations and common departures found by NICEIC Area Engineers.
Its handy size and sturdy binding make it a practical book to keep in your toolbox. It also follows the structure of BS 7671 to help you become familiar with the standard and any cross referencing for a more detailed study.
|
|
|
 |
|
|
Customer Reviews
Slightly dull, 17 Oct 2008
Not quite the gripping read that the reviews had me believing it would be. I was expecting some tantalising narrative, imaginative characterisation and a poignant denouement - instead I got a load of electrical charts. Is this postmodernism gone mad? slow, 14 Aug 2008
how long does it take to get it published? done my 17th and my 2391 without this and the guidence note 3, would have been helpfull to have had them in time to use them but never mind its not like they arnt going to sell is it ? Bloo*y anoid usless review, 03 Aug 2008
The main 17th Edition book was out in Febuary.
if you are that worried, either bring it with you, or get the Amicus red book, it is more or less the on-site guide Not yet been published, 13 Jun 2008
Been waiting since 6 april for mine to be sent ? 17 ed regs due to be complied with in july do not think its due to be published untill september 2008 You know you want it, 21 Jul 2008
I am about to order this. After reading the reviews I can't wait to get my hands on this and read it cover to cover to get all 17th,ed and ready for my next NICEIC inspection. It will be great, more regs, more questions, more trying to explain to customers. I may opt (have to) to go on a course aswell which is excellent as I was wondering where to go on holiday this year. Roll on the ammendments. There may even be a prequel and some retro bonding moments to come. 17th Edition, Great if you like poor workmanship and RCDs everywhere to cover poor workmanship!!, 12 Jul 2008
Well, after years of is the 16th overkill or under, we all had our issues with the 16th as practical installers. but my god the 17th. have done the guilds, the tutor hated it, every electrician I know and have met hate the book. New numbering to allign with the EU, wow great friggin idea that was. Oh by the way havn't the IET just issued an ammendment showing how stupid they were and highlighting how many mistakes are in this version. I would wait until they industry sees sense and makes the first published ammendemnt. £65 for a book with mistakes, bloody cheek!
beside this version is great if you a piss poor electrician and like using RCDs everywhere. what ever happend to correctly selecting, installing, inspecting and testing a circuit with good workmanship and materials so that persons, property and livestock etc are protected without the need for these 1666 ohms cheat devices which can and do seize up anyway if not maintained! (pushing the button after two years doesn't make a device relaibel, its under fault that counts!) Might as well use bloody nails. TWO WORDS COWBOYS CHARTER!! Book for the boys, 15 May 2008
A book that is simply not written to be understood. A book that can only really be read if purchased with other guides. A book written by persons that have no idea about this industry. A black cable can now be live, existing blue cables now may be live but new blue ones will be neutrals. Persons will die because of these Regs. Written by so called experts that do not care how much it all costs. Let's put RCDs or RCBOs on everything. Why buy it, because you have to. "Bob the fish!"........., 26 Apr 2008
........What a guy! Try reading the description of the book before buying!
....My missus loves it now i'm "Mr Competant"!
Its just like the last edition, but red &......safety is beefed up.
It'd probably sell better as an audio C.D version, as a SLEEPING aid!
Maybe that'd get the price down to a reasonable cost.
Lets hope its a while before the next one, eh?
Whoa! Steady on Betty!, 03 Apr 2008
Shortly after I received my copy, my TROUSERS EXPLODED!
Its that good!
Its Electric!!!!! An excellent book, 24 Jun 2008
The clear pictures and easy to follow step by step guides were extremely helpful when it came to taking my C&G 2330 Level 3 practical exams. The section on completion of test certificates was particularly good, putting everything into plain language.
I would recommend this book to any trainee electrician. Best yet, 18 May 2008
This is the ultimate guide book if you are studying for your 2391.I have failed this exam once but with this down to earth approach on inspection and testing I feel very confident of a pass.Very easy to understand well explained.Definately aimed at 2391 City and Guilds exam success best book I have come across like a condensed down 7671 and guidance note 3 in easy to remember terms. An Excellent Book, 10 Apr 2008
This book is an excellent guide to inspection and testing. It keeps the theory down to what you need to know to get the job done, without a load of waffle.
The book is full of pictures which are clear and in full colour, showing real electrical installations and how and where to connect test leads. There are also images of testers( Kewtech and Megger) and how to set them up correctly. The author uses a step by step approach and coupled with the photographs you cannot go far wrong.
There are lots of examples of certificates and how to fill them in for example installations. Details of what the values mean and how to calculate/ measure them are also included.
If you are looking for an inspection and testing book I can honestly say buy this one, it is excellent. A must for anyone in the Electrical Installation field, 01 Feb 2008
I was fortunate enough to have been taught by Chris Kitcher at Crawley College for a couple of years before I moved to N.Ireland.
I remember at Crawley barraging him with questions, scenarios etc which he always answered and with references to the regs.
A lot of the questions now appear with answers in the book (although I could still come up with a load more now !!)
I heard this book was due out several months back from students being taught by Chris and knew it was going to be the right book for all electricians out there getting their hands dirty!. I'm definately not disappointed at all. The book is excellent. Look forward to more technical books from Chris if he can get away from Southampton!! Breath of fresh air, 14 Dec 2007
I found the book to be a breath of fresh air from all those other tecnically loaded , anorak wearing , train spotting text books .
The author certainly has a well grounded knowledge of the practical applications of testing and inspecting. Too many errors, 19 Oct 2008
Whilst generally a reasonable book, there are a considerable number of errors. These include referencing incorrect tables and regulation numbers, and a number of simple typographical errors, e.g. stating that the minimum diameter for the main protective bonding conductor should be 60mm sq, rather than 6. Whilst the more experienced will instantly spot these errors, they could lead to confusion to the novice, who, after all, the book is aimed at. One particular area of concern is in the Inspection and Testing section where, in the process of determining R1+R2, the reader is advised to temporarily link together the line conductor and the CPC. At no point is any emphasis placed on the fact the circuit must be isolated from the supply before this procedure is attempted! 17th edition without the headache, 18 Aug 2008
This book will prove invaluable to novice and experienced electricians. It is very well set out and easy to read. Essential if you plan to pass the C&G Exam, 05 Jul 2006
This book will never win a prize for literary content, but if you're going to get serious about Portable Appliance Testing it's this season's must have and it will get you through the C&G exam. Somewhat expensive (hence 4*s) - to be expected maybe? - electrical engineers are probably not best known for their writing skills so there must be a rarity premium. Tells you what you need to know and lots of stuff you don't - hardcore information and good for insomnia too. The Amazon combo deal including this title and "PAT - Portable Appliance Testing: In-service Inspection and Testing of Electrical Equipment" by Brian Scaddan is excellent and gives you the only two documents you really need. Well worth the money. Great book, 27 Jun 2008
Very difficult exam . This gives a great view of Question that could be asked with good answers, Great Help.Lots of advanced study needed before course and exam. This book shows what level is requied. Good Book. Best ever, 28 Apr 2008
If you are like me and started in the trade with the 13th Edition IEE Regs
You will rate this Guide.
Ihave used John Whitfield's Guides for 20 years, its the only one for me.
I always keep one in the tool box and one in the office, As it say's on the back cover I don't leave home without it.
TOP BUY*****, 20 Jan 2008
This book is very handy as i am on the C & G 2330 level 2 course,
It covers all the basic theory calculations TOP BUY*****
Another great re-write!, 13 Feb 2006
I used these books years ago to supplement my teaching of people wishing to become electricians and I am glad to see how they have been simplified to suit all potential electricians. I would recomend this book and indeed book 1 to all theory teachers and their students alike.
How can you do without it!, 13 Feb 2006
Its great to see this excellent book revisited. The new style is totally suitable for todays trainee electricians. It must be one of the best value for money books written! Well done
Electrical Installation Calculations, 04 Feb 2004
A very useful study aid, the book is ideal for those who have become a little rusty with their calculations and need to remind themselves of the basics. The exercises and answers allow you to work at a speed suited to yourself and you know that it's right.
Testing Electrical Installations., 07 Mar 2008
A good and well laid out book with clear diagrams. This is an ideal book for students when they begin to do their dead and live testing. Note on review below re. measuring Ze, GN3 and the NICEIC do state disconnecting the means of earthing from the installation earthed equipotential bonding to remove parallel paths.
Claire Kelly, 12 Dec 2007
I bought this book because I am in my second year of Studying City & Guilds Electrical Installation 2330; attend two evening classes per week. This course consists of underpinning knowledge facilitating entry into a career as an Electrician, although I work full time in a completely different industry. I have found the book useful because the clear diagrams and attendant explanations can be used to back up testing and inspection on our practical work and during class discussions. I have recommended this book to my fellow students some of whom are electricians working to gain qualifications; they have found the information very useful.
Testing Electrical Installations A practical guide for electricians: A Practical Guide for Electricians, 19 Sep 2007
I think this is an excellent publication. I take on board the comments about testing for Zs and I agree with the author of the book. I have come across installations where there is no actual true Ze, but it is being provided by other parallel earth paths. Testing this way is about risk assesment and there is a big difference between testing domestic and industrial properties. At least this author has had the courage to pragmatically show testing and the efficient and accurate ways to do it. Too many people think they know how to do it, but have never actually tried to do it. If they had they would understand the confusing results that you get with the effect of the parallel earth path problem - difficult to explain when the sums just do not add up!
My only criticism of the book is that it would have been nice to have had the Zs table and the protective devices table and fault current graphs included out of the regs. It would just reinforce why we are testing and what we are truly looking for.
But an essential for those sparks who need a refresher and don't want long winded explantions and an absolute must for any young sparks starting out, I wish I had this 30 years ago.
An Outstanding guide to testing, 27 Jul 2007
This book has good clear diagrams which show you exactly how to carry out testing. This is complemented by clear, easy to understand explanations of what to do and when to do it. In my opinion this is a must have book, always useful when on a job to use as a quick reference guide, I must stress the diagrams are very clear and easy to understand and the explanations down to earth and very understandable.
paul povey, 26 Jun 2007
with reference to comments left by 'a reader' Below i would like to point out that for an acurrate measurement of ZS it is perfectly obvious you would indeed need to remove all 'Parrallel Earth Paths' from the equation.
It is without doubt a procedure which should be carried out under the safest cucumstances
i.e ( all persons and livestock NOT to be present during the test duration)
i feel your comments for saying this book is not relied upon to be completely irrational and totaly un-justifiable.
Testing and inspection nowadays is only carried out by competent personel and such personel would have the ability and knowledge to realise that this process of reading ZS is entirely required and should be carried out in a manner that would involve zero risk.
I think 'A reader' will now need to re-test every job he/she has ever tested as all of his/her ZS readings are most definitely inacurate.
this book is one of the best ever written on the subject in my oppinion.
keep up the good work trevor marks!!
|
|
|
 |
| |